Series 360 ES Balances

• Fully automatic internal calibration system, programmable time and temperature controlled (SCS)
• Draft shield with ambidextrous operation
• Die-cast aluminium housing of the balance
• Clock with date and time
• High contrast liquid crystal graphic display with high resolution
• High resolution weighing cell with optimised electronic control
• USB device and RS232/V24 bi-directional interface as standard
• Upgrading via Internet
• Multi-user memory (MUM)

• Pipette calibration
• Density determination
• Variety of measurement units
• Multi-level back weighing
• Dynamic weighing and dynamic differential weighing (weighing on ship)
• Minimum sample weight (MSW) according to USP
• Automatic Reproducibility Test (ART)
• Buoyancy Error Suppression Technology (BEST)

• Swiss made
• Backlit LCD
• Self-Calibration-System
• RS232 interface for PC / printer
• USB device
• EU/OIML type approval
• Support IQ/OQ/PQ
• Anti-theft protection
• Clock (printout GLP/GMP, auto-cal, etc.)
• Below balance weighing

• Variety of measurement units
• Percent weighing
• Piece counting
• Animal weighing
• Density determination
• Check weighing
• Net total application: Add up summation
• Free conversion Area conversion
• Statistics
• Recorder
• Multilevel back weighing
• Dynamic differential weighing (weighing on ship)
• Pipette calibration
• Buoyancy error suppression technology
• Minimum sample weight according to USP
• Automatic repeatability test

• Draft shield 360 automatic, height 260 mm, for 0.01mg and 0.1mg balances
• Podest for draft shield 360
• Draft shield 321 LG, height 260mm
• Draft shield easy (glass with cover), for 0.001g balances
• Hook for weighing below the balance
• Cable for balance 360/321 used as reference balance
• Desk power adapter with EU plug, 80V - 240V, for balances with IP65 (protection against ingress of dust and low pressure water jets)
• Density kit, for 0.01mg and 0.1mg balances, container size: Ø = 75mm, h = 100mm
• Density kit solids only (without glass body and hook), for 0.01mg and 0.1mg balances, container size: Ø = 75mm, h = 100mm
• Glass body for density determination of liquids, V = 10cm3
• Downholder for samples with ρ < 1g/cm3
• Evaporation trap for pipette calibration, for 0.01mg and 0.1mg balances
• Adapter for Eppendorf evaporation trap, for 0.01mg and 0.1mg balances
• Animal weighing bowl complete, for 0.01g balances
• Animal weighing bowl complete, for 0.1g and 1g balances
• Dust cover for the whole balance, set of 20 pieces, for 0.01mg and 0.1mg balances
• Dust cover for the whole balance, set of 20 pieces, for 0.001g, 0.01g, 0.1g, 1g balances

• Printer CBM910 230V, incl. data cable and paper roll
• Printer CBM910 115V, incl. data cable and paper roll
• Paper roll for Printer CMB910
• Ribbon for printer CMB910
• Multiplexor for up to 7 balances of the series 165/320/321/360/490 for serial (RS232) data transmission to PC or printer (at least one balance has to be of the series 320/321)
• Adapter RJ45 / DB9 f, (to PC)
• Adapter RJ45 / DB25 m, (to printer)
• Data cable DB9 m / DB9 f, length 1.5m, (to PC)
• Data cable DB9 m / DB25 m, length 1.5m, (to printer)
• USB cable A-B, length 1.5m
• HID cable, RS232 / USB (x: 0=e, 1= d, 2=f)
• UPS (uninterruptible power supply), external
• Anti-theft device, mechanical
• Bowl for diamonds (carat bowl)

• Initially verified according to 2014/31/EU by Precisa, available for balances with EC(/OIML) type approval and SCS only
• IP65 (protection against ingress of dust and low pressure water jets), fitted at factory, for 0.01g, 0.1g and 1g balances only (others on request)

• Remote display, freestanding, with cable, length 1.5m
• Remote display, mounted to the wall, with cable, length 3m
• RS232 interface box for data transmission, DB25 f:
  - to PC, printer or bar code printer
  - from bar code reader (350-8856) or reference balance
• Interface box, current loop, 20mA, passive
• Analog output box, -10V .. +10V, resolution 10mV
• Ethernet box, wired
• Ethernet box, wireless
• Signal lamp, indicator with 3 lamps; red, green and yellow
• Horn for signal lamp
• I/O box with 6 TTL inputs and 8 relay outputs
• CCE bar code scanner BCS5040, DB25 m, to be connected by meanings of the RS232 interface 350-8506

• Precisa BUS converter, enables connection to almost all Precisa BUS accessories

• SmartBox Counting
• SmartBox FPVO (finished goods packing control)
• CCE bar code scanner BCS5040, RJ45, to be connected by meanings of channel 1 or 2 of the SmartBox

Models