Series 321 LX Balances

• Die-cast aluminium housing of the balance
• blueLINE high contrast blue vacuum fluorescent display
• As standard with fully automatic internal calibration system, programmable on time or temperature controlled (SCS)
• Clock with date and time
• Printout according GLP
• USB device and RS232/V24 bi-directional interface as standard
• PrecisaBUS for the different accessories
• Electronic anti-theft code
• IP65 protection against ingress of dust and water available
• Updates via Internet

• Variety of measurement units
• Piece-counting
• Percent weighing
• Live Animal weighing
• Dynamic weighing
• Density determination
• Plus/minus check weighing
• Formulation, Weight by totalisation
• Free units calculation
• Statistics calculation and recorder function

• Swiss made
• Vacuum fluorescent display
• Automatic calibration warning
• RS232 interface for PC / printer
• USB device
• EU/OIML type approval
• Support IQ/OQ/PQ
• Anti-theft protection
• Clock (printout GLP/GMP, auto-cal, etc.)
• Below balance weighing

• Variety of measurement units
• Percent weighing
• Piece counting
• Animal weighing
• Density determination
• Check weighing
• Net total application: Add up summation
• Free conversion Area conversion
• Statistics
• Recorder
• Dynamic differential weighing (weighing on ship)
• Automatic repeatability test

• Draft shield 321 LG, height 260mm
• Glass draft shield for balances with 1 mg readability including cover
• Hook for below-balance weighing port
• Density kit, for 0.01mg and 0.1mg balances, container size: Ø = 75mm, h = 100mm
• Density kit solids only (without glass body and hook), for 0.01mg and 0.1mg balances, container size: Ø = 75mm, h = 100mm
• Glass body for density determination of liquids, V = 10cm3
• Downholder for samples with ρ < 1g/cm3
• Animal weighing bowl complete, for 0.01g, 0.1g and 1g balances
• Dust cover for the whole balance, set of 20 pieces
• Cable for using the balance as reference balance
• External USP battery pack for an uninterruptible power supply
• Power supply adapter with Euro plug for IP65-protected balances (80 V – 240 V)
• Pedal for tare or print function

• Printer CBM910 230V, incl. data cable and paper roll
• Printer CBM910 115V, incl. data cable and paper roll
• Paper roll for Printer CMB910
• Ribbon for printer CMB910
• Multiplexor for up to 7 balances of the series 165/320/321/360/490 for serial (RS232) data transmission to PC or printer (at least one balance has to be of the series 320/321)
• Adapter RJ45 / DB9 f, (to PC)
• Adapter RJ45 / DB25 m, (to printer)
• Data cable DB9 m / RJ45, crossed, length 1.5m (from reference to counting balance)
• Data cable DB9 m / DB9 f, length 1.5m, (to PC)
• Data cable DB9 m / DB25 m, length 1.5m, (to printer)
• USB cable A-B, length 1.5m
• HID cable, RS232 / USB (x: 0=e, 1= d, 2=f)
• UPS (uninterruptible power supply), external
• Anti-theft device, mechanical
• Bowl for diamonds (carat bowl)

Integrated, fully automated self-calibrating system SCS including clock. Automatic calibration for temperature changes and time programmable

• IP65 protection: protects against dust and splash water, not available for every model
• IP65 protection including cable for an RS232 interface with DB9 female 1.5 m (PC): protects against dust and splash water, factory fitted, not available for every model
• Preparation for calibration in accordance with EC / OIML, no calibration! Only for balances with EC / OIML type approval
• Manufacturer‘s factory calibration in accordance with EC / OIML Only for balances with EC / OIML type approval and SCS

• Remote display, freestanding, with cable, length 1.5m
• Remote display, mounted to the wall, with cable, length 3m
• RS232 interface box for data transmission, DB25 f:
  - to PC, printer or bar code printer
  - from bar code reader (350-8856) or reference balance
• Interface box, current loop, 20mA, passive
• Analog output box, -10V .. +10V, resolution 10mV
• Ethernet box, wired
• Ethernet box, wireless
• Signal lamp, indicator with 3 lamps; red, green and yellow
• Horn for signal lamp
• I/O box with 6 TTL inputs and 8 relay outputs
• CCE bar code scanner BCS5040, DB25 m, to be connected by meanings of the RS232 interface 350-8506

• SmartBox Counting
• SmartBox FPVO (finished goods packing control)
• CCE bar code scanner BCS5040, RJ45, to be connected by meanings of channel 1 or 2 of the SmartBox

Models

Service Functions

• Programmable Service Messages
• Easy self test by a simple key stroke
• Automatic Reproducibility Test (ART)