Einstellen des Netzwerks

Die Waage kann in ein Netzwerk eingebunden werden. Dazu muss ein LAN-Kabel oder ein USB-WLAN-Adapter an der Unterseite des Waagenanschlusses eingesteckt werden.

Datenempfang

Eine Liste möglicher Befehle zur Fernsteuerung finden Sie am Ende dieses Hilfetextes.

Senden von Daten

Modus-Protokoll

Im Modus Protokoll wird das für die Anwendung definierte Protokoll je nach Einstellung automatisch oder mit der [PRINT]-Taste ausgegeben.

Modus-Messübertragung

Im Modus Messwertübertragung durch Drücken der Soft-Taste [Transfer] bzw. der [PRINT]-Taste (abhängig von der Trigger-Einstellung), Der aktuelle Gewichtswert wird entsprechend dem eingestellten Format der Messwertübertragung übertragen. Wenn der Auslöser auf der Transfer-Taste eingestellt ist, muss die Soft-Taste [Transfer] in der Aktionsleiste aktiviert werden.

• Auswählen Art der Ausgabe als Messwertübertragung

Beachten Sie, dass Sie Aktivieren Sie in der Aktionsleiste die Softtaste [Übertragen] im Modus Messwertübertragung.

• Zeitstempel, Gerät ID, ID und Netto/Brutto/Tara werden optional mit ausgegeben den Messwert, wobei die Brutto- und Tarawerte auf eine separate Zeile.

• Wenn der Auslöser auf der Transfer-Taste eingestellt ist, drücken Sie die Soft-Taste [Transfer], um die aktuellen Werte zu übertragen.

• If trigger is set on Print key, press the [PRINT]-key to transfer the current values.

Mode of the communication

The Server communication mode is used when a PC, LIMS or other device wants to connect to the balance. It is recommended to use a static IP address, as the balance can always be reached with the same address. Further details about the setup and the local port can be found below.

The Client communication mode is used when the balance wants to connect to a passive device such as a printer. The use of an automatic IP address proivided by a DHCP server is usually sufficient, since the address of the balance is not relevant. Further details about the setup and the remote host port as well as the remote host address can be found below.

Using DHCP or a static IP address

To connect the balance to the network, the details must be discussed with the network administrator. It is important to know whether to assign to the balance a static IP address or an automatic IP address from a DHCP server. In addition, the network administrator knows the port of the remote terminal of the network connection; for Precisa printers or software, this is normally port 2101 or 4001.

If an automatic IP address of the DHCP server is sufficient, switching on DHCP automatically connects the balance into the network.
In case a static IP address must be used, the network administrator knows the settings of the IP address, subnet mask and default gateway.

Connecting to the LAN or WLAN

In case you have selected in the menu Data Exchange WLAN the additonal entry WiFi list appears in the selection. Press [Set] to select the network with the password, according your network administrator.

Setting Up in Server Communication Mode

In this mode, a device connects to the balance. In addition to the IP address of the balance, the device must also know the local port of the balance. If this is not explicitly given, use port 2101.

• Mode of data output as Protocol or Measurement transfer

• Local port of the balance which must be set on the other device

Setting Up in Client Communication Mode

In this mode, the balance connects to a device, or often to a printer. To do this, the balance must know the IP address and the local port of the printer. If this is not explicitly given, use port 4001.

• Mode of data output as Protocol or Measurement transfer

• Remote host address or network name of the device to which the balance is to connect

• Remote host port or the local port to which the scale is to connect onto the device

Remote control commands

Each remote command has to be closed with CR LF which corresponds to pushing the [Enter] key. Commands can be acknowledged using ACK1.

Command specification

AOST       : Print out AOS-Temperature in degrees Celsius